Setting The Internal Clock Of The Device - Guntermann & Drunck Remoteaccess-Gate Installationsanleitung

Setting the internal clock of the device

Set the internal clock of the device manually, or synchronize it with an NTP server
via Network Time Protocol.
NOTE: The current system date and time of the device are displayed in the upper
right corner of the web interface.
How to activate the synchronisation of the internal clock with an NTP server:
1. In the client, click on
2. Enter the following values under
Time Zone:
Automatic
Daylight Saving
Time Adjustment:
Time Setup
Method:
3. Enter the following values under
First/Second
NTP Server:
4. Click on .
Save
How to manually set the internal clock of the device:
1. In the client, click on
2. Enter the following values under
Time Zone:
Automatic
Daylight Saving
Time Adjustment:
Time Setup
Method:
Device Settings > Date/Time
Common Settings
Select the time zone at the location of the device.
Activate this option if you want the time to change automat-
ically from summer to winter time (and vice versa).
Select the option
Synchronize with NTP Server
NTP Settings
Enter the address of an NTP server.
Device Settings > Date/Time
Common Settings
Select the time zone at the location of the device.
Activate this option if the time change from summer to win-
ter time (and vice versa) should be done automatically.
Select the option User Specified Time
Initial configuration
.
:
.
:
.
:
.
G&D RemoteAccess-GATE · 9