Sublue Whiteshark Tini Betriebsanleitung Seite 18

Operation Method
Items
In the shutdown state,
press the power system
Power
switch/networking button
system
for 6S to enter the
networking
2
networking mode
In the power-on state, press
Control
and hold the handle
handle
networking button for 3S to
networking
2
enter the networking mode
When it has been turned on
and successfully connected
to the network, press the
control handle
Speed level
switch/speed-level
adjustment
4
adjustment button to adjust
speed. The speed will be
adjusted once you press it
① In the power-on state,
1
press the power system
Power
switch/networking toggle
system
button for 3S
shutdown
② The system will be
2
11
Photos Remarks
Pressing for 3S will turn on
the power system, and
continue pressing until 6S
to enter the networking
mode. After successful
networking, it will
automatically exit this
mode
After the power system
and the control handle
are successfully
networked, press the start
button of the control
handle to exit the
networking mode
There are two speed
levels, and the speed level
is "low speed" after each
restart
There are two speed
levels, and the speed level
is "low speed" after each
restart
3