Assembly The Handle And Handle Bracket - Sublue Whiteshark Tini Betriebsanleitung

3
Tighten the quick-release screws of
the handle bracket
The decorative cover is connected by the buckles and the handle bracket. If you
need to remove the cover, the elasticity of the plastic itself can be used to remove it
with a little force.
2
Assembly of Handle and Handle Bracket
Pass the control handle and the grip handle
through the handle bracket mounting holes
and tighten them.
The control handle can be installed on the
left or right side according to the needs.
Before each use, check whether the
tightening handle is tight.
9
4
Complete the assembly of
power system and handle bracket