List Of Components - CLIMASTAR SILICIUM OPTIMAX Bedienungsanleitung

LIST OF COMPONENTS

Make sure the following elements are included. If any is missing, please
contact to your distributor:
1 x 2 x 4 x
3.- BEFORE STARTING YOUR DEVICE
Before connecting the heater check that the supply voltage is the same as
that stated on the heater technical label.
Neither the mains cable nor any other cable or wire must come into
contact with the hot parts of the unit.
If the heater is installed in a room containing a bath or shower, it should
be so installed that switches and other controls cannot be touched by a
person using a bath or shower, in compliance with the regulation in force
in each country.
The use of these heaters is forbidden in any area where there is a presence
of gases, explosives or inflammable objects.
4.- ASSEMBLY
Place the heater upside down.
Screw the castors kit as shown in the following image:
12