Tempco Connect 1M RF Web Bedienungsanleitung Seite 3

1.3 Wall receiver:
A
(RF configuration
(Green/Red)
button )
/
Short press
3sec press
6sec press orange
15sec press orange blinking
/
/
/ orange
/
1.4 Wall receiver Heat & Cool:
A
(RF
configuration (Red / Green)
button )
/
/ Green 50%
/ Green 1 flash 10%
/
/
/
Short press
10sec press
/
/
/ Red / green flash
2. Technical characteristics
Environment. (Temperatures)
Operating :
shipping and storage :
Power supply
Electrical protection
Output
Maximum Load
Radio Frequency &
RF Receiving distance
Pilot wire Input (French market)
Optional Floor sensor
CE Directives
Your product has been
designed in conformity with
the European Directives.
B C
(red)
green /
green /
/
green
/
/
green red
/
green
/
green /
C
B
(red /
blue)
green /
/
/
/ Red
/ Blue
/ /
/ /
/ /
/ /
/ /
/
Plug Receiver
0°C - 40°C
-10°C to +50°C
230Vac 50Hz
Class II - IP20
Relay 16Amps 250VAC
Up to 16A - 250Vac 50Hz
(by European plug socket)
868MHz
Range of approximately 100m in open space.
Range of approximately 30m in residential environment.
/
/
R&TTE 1999/5/EC
LVD 2006/95/EC
EMC 2004/108/EC
RoHS 2011/65/EU
D
(green)
/
/
Green flash
Green
Green
blinking
/
Green flash
/
Permanently Green blinking
D
(orange)
/
/
/
/
/
/
/
Orange slow flash
Orange quick flash
Orange quick flash permanently
/
Flush Receiver
Relay 16Amps
250VAC
Up to 16A - 250Vac
50Hz (2 wires L,N)
< 10mW (Bidirectional communication)
6 orders pilot Wire by phase (L)
NTC 10kOhms at
25°C
3
Power ON
Instantaneous RF transmission
Thermostat or Central RF init.
Slave receiver RF init.
Reset of the receiver
Heating demand
RF reception
Pilot wire information
RF Alarm
Comfort mode, without heating
Reduced mode, without heating
Antifreeze mode, without heating
Heating demand
Cooling demand
OFF mode
ON/OFF mode
Thermostat or Central RF init.
RF reception
RF signal lost
Error on Thermostat sensor
Wall Receiver Wall Receiver H&C
Relay 10Amps 2 Relays 5Amps
250VAC 250VAC
Up to 10A - 250Vac Up to 5A - 250Vac
50Hz (2 wires L,N) 30Vdc (free contact)
/
/
/