Filter Cleaning - Concept OV2016 Betriebsanleitung

EN
If you are not going to use the appliance for a prolonged period of time:
1. Unplug the unit, wind the power cord up, and hang it on the back of the appliance.
2. Empty the water tank, wipe it with a cloth and return it to the unit.
3. Clean the air filter.
4. Store the unit in upright position, do not place it on its side or back and avoid direct sunlight.
How to empty the water tank
1. Remove the tank from the unit.
2. Grasp the tank by the handle and move it gently.
3. Tilt the tank and carefully drain water out.
4. Put the tank back in the unit.
Note: Water is collected in the tank during the operation. As soon as the tank is full, the dehumidifier stops automatically
and the circular LED indicator on the front of the dehumidifier and the "Tank full" LED indicator next to the "Power"
button start flashing red.
Continuous drainage of water
To use the continuous drainage function, first remove the water tank and insert a PVC drain hose with a diameter of 10
mm into the drain hole. Then put the tank back in place.
Make sure that the drain hose is firmly positioned and that no water leaks anywhere. Connect the drain hose to
a suitable water drain. This should be at a lower level than the water outlet of the dehumidifier. The outlet can also be
connected to a water pump (for example when dehumidifying a cellar). In the continuous water drainage mode, you
must set the desired humidity to 35 % so that the dehumidifier operates without interruption.
LAUNDRY DRYING
The dehumidifier can also be used for drying laundry. Set the desired humidity to 35 % and put the appliance in Smart
mode. Do not place damp clothing directly on the dehumidifier openings. For best effect, place the dried laundry 1.5
meters from the dehumidifier.

FILTER CLEANING

Before cleaning the filters, remove the filter cover from the dehumidifier unit.
Air filter
- remove the air filter from the holder
- rinse the air filter under running water
- let it dry and then put it back
Carbon filter (if included in the package)
- clean the filter every 2-3 weeks
- carefully vacuum the filter with a vacuum cleaner
- replace the filter with a new one every 6 months for more efficient air cleaning operation
Note: The carbon filter is optional, but never turn on the dehumidifier without the air filter!
70
Warning:
1. The operating temperature of the dehumidifier is 5-35 °C. Use the appliance within this temperature range. If you
use the device outside the specified temperature range, the safety fuses will stop the operation. This is normal.
2. If the room temperature is below 5 °C, the humidity is relatively low and the dehumidifier cannot be used.
3. The built-in compressor produces heat and it slightly increases the room temperature during operation. This is
normal.
4. The dehumidifier stops operating as soon as the water tank is full.
5. Ensure that the float lever works normally, do not place anything on it.
6. Keep a minimum distance of 20 cm between the openings of the appliance and near objects.
DOWNLOADING THE APPLICATION AND PAIRING WITH THE DEVICE
1. Find and download the "Concept Home" app on Google Play or in the App Store to your mobile phone (Fig. 1).
2. If you already have Concept Home, open the app, sign in, and continue with the pairing instructions (Fig. 2).
3. If you are a new user, start by registering. Follow the instructions to enter the verification code and complete the
registration (Fig. 3).
4. Then press + or "Add device" (Fig. 4) in the application to add a new device.
5. For faster pairing with the device, use the Auto Scan function and give the application all the necessary permissions.
1) 2)
After successful set-up (Fig. 6), press "Completed" to enter the device control interface (Fig. 7).
PAIRING TROUBLESHOOTING
• Verify that your Wi-Fi network password is correct.
• The device only supports 2.4 GHz Wi-Fi networks.
• The router is overloaded as many other devices are connected.
• If the appliance can't be found automatically, try adding it manually.
OV2016 OV2016
3) 4)
6) 7)
EN
5)
71