Maintenance, Repairs Und Warranty; Storage; Cleaning - SoFlow Lou Board 1.0 Originalbetriebsanleitung

User Manual

7. Maintenance, repairs und warranty

7.1 Storage

Before storing, your product has to be disconnected from the power supply. The product has to be protected from dust,
moisture, coldness as well as shock-protected and stored in an room inside.
If you do not use your Lou Board regularly, charging the battery is recommended monthly, to reduce capacity loss of your
battery. The self-discharge of the battery is higher at colder temperatures (i.e. in winter) than it is in a warmer environment.
Never store the device for a longer period exposed to direct sunlight (also do not leave it in the trunk of a car). The
temperature of the Lou Board and the battery could otherwise rise over 45°C, which could lead to irreparable damages to
the device and/or the battery.

7.2 Cleaning

To reduce the risk of rust on the metallic components of the Lou Board, you should clean and dry the device after every
usage. Use a moist but not wet cloth as well as a neutral cleaning agent. Then dry the Lou Board with a dry towel. Never
clean the device under running water, because the moisture and possible pollution could lead to irreparable damage of the
electronic components. The regular cleaning of screws and ball bearings will increase the longevity of the device.
copyright by www.louboard.com 29
Flowpad Bedienungsanleitung