TFA 60.2561 Bedienungsanleitung Seite 10

TFA_No. 60.2561_Anleitung
Radio-controlled alarm clock with temperature
CAUTION
• Unauthorized repairs, alterations or changes to the product are pro-
hibited.
• Do not expose the device to extreme temperatures, vibrations or
shocks.
• Clean the instrument with a soft damp cloth. Do not use solvents or
scouring agents.
• Protect it from moisture!
5. Elements
A: Display (Fig. 1):
A 1: Daylight Saving Time (DST) symbol
A 2: DCF reception symbol
A 4: Indoor temperature
A 6: Date
B: Buttons (Fig. 1):
B 1: AUTO LIGHT ON/OFF switch
B 2: TIME SET button
B 3: DOWN button
B 4: UP button
B 5: RESET button
B 6: ALARM SET button
18
18.12.2020 12:42 Uhr Seite 10
A 3: Alarm symbol
A 5: Day of the week
A 7: Time
Radio-controlled alarm clock with temperature
B 7: ALARM ON/OFF switch
B 8: SNOOZE/LIGHT button on the top
C: Housing (Fig. 1+2):
C 1: Light sensor
C 2: Battery compartment
6. Getting started
6.1 Insert the batteries
• Open the battery compartment and insert two new AA 1.5 V batter-
ies, polarity as illustrated.
• The backlight turns on for a short period. The device will alert you
with a beep and all LCD segments will be displayed for a short
moment. Close the battery cover again.
6.2 Radio-controlled time reception
• The clock will now scan the DCF frequency signal and the DCF sym-
bol flashes on the display. When the time code is successfully
received after some minutes, the radio-controlled time and the DCF
symbol will be shown steadily on the display. In Daylight Saving
Time DST is shown on the display.
• If there is no reception, you can start the initialisation manually.
Press and hold the DOWN button for 3 seconds.
• The DCF symbol flashes.
19