Herunterladen Diese Seite drucken

Viessmann 5039 Bedienungsanleitung Seite 3

H0 taxischild mit led-beleuchtung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Gewährleistung
Jeder Artikel wurde vor Auslieferung auf volle Funktionalität
geprüft. Der Gewährleistungszeitraum beträgt 2 Jahre ab
Kaufdatum. Tritt in dieser Zeit ein Fehler auf und Sie finden die
Fehlerursache nicht, nehmen Sie bitte Kontakt mit uns auf (ser-
vice@viessmann-modell.com). Senden Sie uns den Artikel zur
Kontrolle bzw. Reparatur bitte erst nach Rücksprache zu. Wird
nach Überprüfung des Artikels ein Herstell- oder Materialfehler
festgestellt, wird er kostenlos instandgesetzt oder ausgetauscht.
Von der Gewährleistung und Haftung ausgeschlossen sind
Beschädigungen des Artikels sowie Folgeschäden, die durch
unsachgemäße Behandlung, Nichtbeachten der Bedienungsan-
leitung, nicht bestimmungsgemäßen Gebrauch, eigenmächtigen
Eingriff, bauliche Veränderungen, Gewalteinwirkung, Überhitzung
u. ä. verursacht werden.
6. Technische Daten
Betriebsspannung:
Stromaufnahme:
1. Important information
Please read this manual completely and attentively before using
the product for the first time. Keep this manual. It is part of the
product.
1.1 Safety instructions
Caution:
Risk of injury!
Tools are required for installation.
Electrical hazard!
Never put the connecting wires into a power socket! Regularly
examine the transformer for damage. In case of any damage,
do not use the transformer.
Make sure that the power supply is switched off when you
mount the device and connect the cables!
Only use VDE/EN tested special model train transformers
for the power supply!
The power sources must be protected to avoid the risk of
burning cables.
1.2 Using the product for its correct purpose
This product is intended:
-
For installation in model train layouts and dioramas.
-
For connection to an authorized model train transformer
(e. g. item 5200).
-
For operation in dry rooms only.
Using the product for any other purpose is not approved and is
considered inappropriate. The manufacturer is not responsible
for any damage resulting from the improper use of this product.
1.3 Checking the package contents
Check the contents of the package for completeness:
-
Taxi sign with LED lighting
-
Retaining ring
-
Manual
3
(mit und ohne Art. 5215, Powermodul)
EN
10 – 16 V AC ~
14 – 24 V DC =
13 – 24 V Digitalsignal
ca. 1 mA

Werbung

loading