Toshiba 26/32WL36 Bedienungsanleitung Seite 21

Below are the answers to some of the most common queries.
Q
Why is there no sound or picture?
A
Check the mains switch is on and check all
connections.
Check the TV is not in standby mode.
Q
There IS a picture, but why is there little or no
colour?
A
When using an external source, for instance, a
poor quality video tape, if there is little or no
colour, improvements may sometimes be achieved. The
colour is factory set to Auto. to automatically display the
best colour system.
To check that you have the best colour:
With the external source playing, select Manual
1
setting from the SET UP menu.
With S or R choose between Auto., PAL,
2
SECAM, NTSC 4. 43 or 3. 58.
Q
Why doesn't the video/DVD being played show
on screen?
A
Make sure the VCR or DVD player is connected to
the TV as shown on page 6, then select the correct
input by pressing
Q
Why is there a good video picture but no sound?
A
Check the Scart lead connection.
Q
Why is there a picture but no sound?
A
Check the volume has not been turned down or
that sound mute has not been selected.
Downloaded from www.Manualslib.com
Q
uestions
Manual setting
Colour system : Auto.
EXT3 A V C R
Store MENU Back EXIT Watch TV
B .
manuals search engine
A
nswers
and
Q
Why is the video/DVD in black and white?
A
Check the correct input has been chosen,
S-VIDEO or AV. See AV connections.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a different TV
station. Manual fine tuning may help.
Select the Manual tuning menu. Highlight the
1
station and press OK, then press R to select
Manual fine tuning.
Using P or Q adjust to get the best picture and
2
sound. Press OK and then EXIT.
1 I A
Store MENU Back
Q
Why are there vertical stripes on the screen?
A
The Sampling clock may need adjustment. Select
PC Setting from the FEATURE MENU, highlight
Sampling Clock and adjust until the lines clear.
Q
Why are there horizontal stripes and/or blurred
images on the screen?
A
The Clock phase may need adjustment. Select PC
Setting from the FEATURE MENU, highlight
Clock phase and adjust until the picture clears.
Q
Why don't the controls on the front of the TV
work?
A
Check that Panel lock is not ON.
Q
Why doesn't the remote control work?
A
Check the side switch on the remote control is in
TV mode.
Check the batteries aren't dead or inserted incorrectly.
21
Manual tuning
Manual fine tuning
22 + 2 B B C 1
EXIT Watch TV