General Safety Information; Electrical Safety; Operational Safety - Heidolph Hei-MIX Reax top Betriebsanleitung

General safety information

Observe the following general safety instructions to prevent any
personal injury and/or damage to property when handling the
device.
➜
Before commissioning and using the device, familiarize yourself with all the safety
regulations and guidelines for occupational safety applicable at the place of use and
observe them at all times.
➜
Only operate the device if it is in perfect technical condition. In particular, make
sure that no visible damage can be detected.
➜ If there is missing or misleading information on the device or on occupational
safety, contact the responsible safety specialist or our technical service.
➜
Only use the device in accordance with the regulations for intended use ("Intended
use" on page 24).

Electrical safety

➜ Ensure that the voltage indicated on the rating plate matches the supply voltage of
the country in which the device is being used.
➜ Ensure that the mains socket-outlet is protected by means of a residual-current
device (RCD).
➜
Always use the supplied power supply cord provided with the device.
➜ Prior to use, check that the device and the power supply cord are free of visible
damage.
➜
Have repairs and/or maintenance work on the device carried out exclusively by an
authorized and skilled electrician or by the technical service department of Heidolph
Instruments.
➜
Always switch the device OFF and disconnect it from the power supply before
carrying out maintenance work, cleaning, or repairs.

Operational safety

➜ Do not make any unauthorized changes or modifications to the device!
➜
Only use genuine spare parts and accessories, or those expressly approved by the
manufacturer!
➜ Observe all safety instructions and hazard warnings as well as all (handling)
instructions contained in this document!
Noncompliance will invalidate any warranty against Heidolph
Instruments.
The operator is solely liable for all damage resulting from unau-
thorized changes or modifications to the unit, from the use of
unauthorized or non-genuine spare parts and accessories, or from
disregarding the safety instructions and hazard warnings or the
manufacturer's instructions!
26
Safety