Basic product information
Standards and directives, product certification
CE Marking
The device complies with the following standards:
▪
▪
Residual risk
The device was designed and manufactured in accordance with the latest technical
standards at the time of development and the recognized safety regulations. During
installation and use, as well as during maintenance work, repairs and cleaning, there
are nevertheless certain residual risks associated with the device described.
These are identified and described at the appropriate points in this document.
Intended use
The device described in this manual has been developed and designed by the manufac-
turer for the following laboratory activities:
–
Shaking
–
Mixing
–
Emulsifying
–
Suspending
–
Dissolving
Due to its design, the device in its delivery condition may only be used in analytical
processes or in laboratory-like conditions in the food, cosmetics, and pharmaceutical
industries as well as other comparable industries that manufacture products intended
for consumption by humans or animals, or for use on humans or animals.
Any other use of this device is not considered as intended!
Reasonably foreseeable misuse
For use under conditions or for purposes deviating from the intended use, additional
measures may become necessary, and/or specific guidelines and safety regulations will
have to be observed (see section "Special hygiene measures for the use of labora-
tory equipment in food, cosmetics and pharmaceutical production" on page 28).
Corresponding requirements must be evaluated and observed by the operator in each
individual case.
Compliance with and implementation of all relevant guidelines and safety measures for
the respective field of application is within the sole responsibility of the operator.
All risks resulting from improper use are solely borne by the operator.
The device may exclusively be operated by authorized and
instructed personnel. Training and qualification of the operating
personnel as well as ensuring that the device is operated with
responsibility are the sole responsibility of the operator!
European Machinery Directive, 2006/42/EC
EMC Directive, 2004/108/EC
24
General notes