Connections; Connecting Inputs; Connecting An Analog Turntable - Pioneer SVM-1000 Bedienungsanleitung

CONNECTIONS

CONNECTIONS
Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

CONNECTING INPUTS

Analog turntable
Pioneer DJ/VJ DVD players or DJ CD players
Audio cable connection
Connect the audio output connectors from a DJ/VJ DVD player or
DJ CD player to this unit's DVD input, DVD/LINE input, or LINE
input connectors, then connect the control cable to the same
channel's CONTROL connector.
Set the connected channel's AUDIO INPUT selector switch (on
the upper panel of this unit) to [DVD], [LINE], or [DVD/LINE], to
match the selected input connectors.
When establishing a digital connection, connect the DJ/VJ DVD
player or DJ CD player's digital coaxial output connector to either
the channel 2 or 3 DIGITAL IN connector of this mixer.
Video cable connection
Connect the video output connectors of a DJ/VJ DVD player or DJ
CD player to this unit's video input connectors, then connect a
sync signal cable (sold separately) to this unit's sync signal output
connector. Set the connected channel's VIDEO INPUT selector
switch (on the upper panel of this unit) to [DVD], [VIDEO], or [S-
VIDEO], to match the selected input connectors.
10
En
Downloaded from www.Manualslib.com
4 3
AUDIO OUT
SIGNAL GND
PHONO DVD/LINE LINE DVD
MASTER OUT 1
R
L L
CONTROL CONTROL
R R
POWER
OFF
SYNC SYNC
ON
DIGITAL
OUT OUT
IN
VIDEO OUT
DVD DVD
AC IN S-VIDEO S-VIDEO
VIDEO VIDEO
L R L R L R
DJ/VJ DVD player or
DJ CD player
manuals search engine
2
1 GND 2 HOT
MASTER REC
OUT BOOTH LINE
OUT 2
L 3 COLD
MONITOR
(TRS)
L L
MASTER
R L
ATT.
-3 dB
-6 dB 0 dB
R R
DIGITAL OUT DIGITAL
IN
fs (Hz)
48 k 96 k
MASTER MONITOR
COMPONENT COMPOSITE
S-VIDEO
Y C C
B R
S-VIDEO S-VIDEO
L R
Cassette deck, etc.
DJ/VJ DVD player or

Connecting an analog turntable

Connect the audio output cables from an analog turntable to this
unit's Channel 1 or 4 PHONO input connectors, then set the
connected channel's AUDIO INPUT switch (on the upper panel of
this unit) to [PHONO]. This unit's PHONO input supports MM
cartridges.
Connect the ground wire from an analog turntable to the SIGNAL
GND terminal of the SVM-1000.
• Note that no PHONO input connector is provided for channel 2
and 3.
Connecting other line level output devices
To use a cassette deck or ordinary CD player, connect its audio
output connectors to one of the SVM-1000's LINE input connectors
(channel 1 to 4).
1
SIGNAL GND
DVD PHONO DVD/LINE
MIC2
L
CONTROL CONTROL
R
SYNC SYNC
OUT OUT MIDI
OUT
DVD DVD
USB
S-VIDEO
VIDEO VIDEO
L R R L
CD player, etc.
Analog turntable
DJ CD player