Energy Saving Functions; Technical Specifications; Pin Assignment - BELINEA 10 Benutzerhandbuch

ENGLISH

ENERGY SAVING FUNCTIONS

This monitor is equipped with power management
functions according to GEA (formerly E2000) and EPA
standard. If your computer is using a compatible
graphics adapter or appropriate software, energy
consumption can be automatically reduced when your
monitor is idle. When the monitor is in power saving
mode, the color of the status LED (see
Mode
On
Off
This monitor is ENERGY STAR ® -compatible. MAXDATA is an ENERGY STAR ® partner and guarantees that this device
complies with the ENERGY STAR ® guidelines for optimizing power consumption.

TECHNICAL SPECIFICATIONS

Picture tube
Input signal
Display colors
Synchronization
Pixel clock
Resolution
Misconvergence
Power supply
Power consumption
Dimensions
Weight
Operating environment

PIN ASSIGNMENT

Pin Assignment
1 Red
2 Green
3 Blue
4 Ground
5 —
6 Red return
7 Green return
8 Blue return
18 - Belinea 10 30 26
‚
in figure 4)
H-Sync V-Sync
active active <73 / 75 Watts
inactive inactive
17 inches diagonal size (40.3 cm visible),
0.26 mm dot pitch,
low emissions according to TCO 99, phosphorus type P22
analog 0.7 Vpp / 75 Ohm, positive
Synchronization: separate, TTL level
Horizontal synchronization: positive/negative
Vertical synchronization: positive/negative
Analog input, unlimited colors
30 - 70 kHz horizontal
50 - 160 Hz vertical
110 MHz
max. 1280 × 1024 pixels
center: max. 0.15mm; edge: max. 0.35mm
100 - 240 VAC, 50/60 Hz
max. 75 W (Standby: < 3 W, Off-Status: < 3 W); Power saving functions GEA (formerly
E2000) and EPA certified
410 mm (width) x 429 mm (height) x 435 mm (depth); (monitor only)
15.5 kg (monitor only)
Temperature: 0 to 40 °C
Rel. humidity 20 to 80 % (without condensation)
Pin Assignment
9 —
10 Ground
11 —
12 SDA (DDC Data)
13 Hor. synch.
14 Vert. synch.
15 SCL (DDC Clock)
will turn yellow. The monitor will automatically switch
back on when you use the keyboard, mouse or another
input device.
The following table illustrates power consumption values
and display indications for this automatic power saving
feature:
Power Cons. Color of
typical / max. Power LED
green
< 3 / 3 Watts amber
15 pin D-Sub connector
Recovery
time
--
< 20 sec.