Step 4 - Install The Receiver - DigiSender XD DGXDSDV111 Bedienungsanleitung

Installing your DigiSender® XD

Step 4 - Install the Receiver

The Receiver will pick up the signals being sent by your Transmitter and output them to a connected
TV.
1.
Locate a vacant SCART socket on the back of your
receiving TV and insert the DigiSender® XD SCART
cable.
3.
Connect the PSU to an available mains socket. The
Power Indicator will light up Red to indicate that the
unit is in Standby Mode.
Please read the instructions carefully prior to installation
Downloaded from www.Manualslib.com
DGXDSDV111 - DigiSender® XD - Single Input Digital Wireless AV Sender System
manuals search engine
2.
Connect the PSU to the socket labelled '5V ~ 1.0A'
on the Receiver.
ENGLISH (EN)
Page 07