Troubleshooting; Frequently Asked Questions - DigiSender XD DGXDSDV111 Bedienungsanleitung

ENGLISH (EN)
DGXDSDV111 - DigiSender® XD - Single Input Digital Wireless AV Sender System

Troubleshooting

Frequently Asked Questions

Q. My picture is jerky, how can I solve this?
A. A jerky picture is an indication of poor Frame Rate. Put the system into Dignostics Mode (see page
08 - 10) and check the Signal Level. Try adjusting the position of the antenna on both the Transmitter
and Receiver whilst another person monitors the Signal Level.
Q. How can I improve the Frame rate?
A. A poor Frame Rate is the result of a significant loss of data packets (a poor Packet Rate) from the
Transmitter. The Receiver is able to reconstruct the lost data packets but it has to make an intelligent
guess as to their value. Try adjusting the position of the antenna on both the Transmitter and Receiver
until the problem is resolved.
Q. I can never acheive a good Packet Rate, can I just leave it as is?
A. Sure. The Receiver has been designed to work with significant packet data loss without any serious
degradation to picture quality and never a loss of sound quality.
Please read the instructions carefully prior to installation Page 13
Downloaded from www.Manualslib.com manuals search engine