Herunterladen Inhalt Inhalt Diese Seite drucken

Brand List; Factory Settings - Loewe Assist Multi-Control Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Assist Multi-Control:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
_33153_Assist_STB_Buch_DE-SE.ind26 26
_33153_Assist_STB_Buch_DE-SE.ind26 26
Downloaded from
www.Manualslib.com
Setting operating mode
Setting the STB button

Brand list

The button with the STB function can be set to the desired device with a
3-digit number.
Press the STB button for at least 5 seconds.
The LED above the STB button flashes twice.
Enter code 003.
The LED above the STB button flashes twice.
Enter the three-digit code from the Brand list of page
189.
Press the On/Off button until the device to be operated
reacts to the inputs on the remote control.
Press the OK button.
When entering an invalid code the LED lights up for 2 seconds.
The setting procedure is cancelled after 10 seconds without a code
input.
In addition to the STB button you can also assign the STB function to
the DVD and AUDIO buttons (page 25).
If you do not find a code with which you can operate your STB device
in this search, make the Internet Update (page 27).

Factory settings

The STB/DVD/AUDIO button can be reset to the factory settings.
Press the button for at least 5 seconds.
The LED above the button flashes twice.
Enter code 000.
The LED above the button flashes twice.
- 26
manuals search engine
23.01.2008 14:36:37
23.01.2008 14:36:37

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis