Control Panel; Product Specification - Philips UV-C Bedienungsanleitung

Control panel:

Power button, hold 3 seconds to unlock/press
once to start working.
Timer button, press once to choose working min.
Press any button to stop working and back to lock mode.
The UV-C device is locked when the LED indicators
light one by one.
The UV-C device doesn't work properly when the LED
indicators are in light flash mode, please contact
customer service.
Operation guide:
1. Power on, the UV-C device is in lock mode, hold
power button for at least 3 seconds to unlock.
2. Press timer button to choose disinfection duration,
there are 3 options, 15min., 30min. or 45min.
3. Press power button to start working mode, please
leave the room and close the door, and the device
will start to disinfect in 30 seconds when sensor
can't detect any human or animal.
Language selection mode:
1. Hold both power and timer button simultaneously for 3 seconds
2. Press timer button for language selection, there are 4 languages for selection:
French , German, Spanish and English
3. Press power button to save and exit the language selection mode
Application:
Recommendation
Disinfection time
*Disinfection effectiveness will vary depending disinfection timing, distance and type of surface/object.

Product Specification:

Product description
Input
Wattage
UV-C device lifetime
Size
Weight
UV-C wavelength
effective irradiance @200mm
Bathroom / Kitchen
15 min
4. The device will go back to lock mode when routine
is completed.
5. Please unplug the device when routine completes.
* The sensor can detect human or animal within 5
meters radius.
* When human or animal enters the 5 meters radius,
the UV-C device will turn off light and switch to lock
mode.
Bedroom
30 min
UV-C disinfection desk lamp
220-240Vac 50/60Hz
24W
9000hours
120X120X247mm
800g
253.7nm
660uW/cm 2
3
LED indicators for
15min., 30min.
and 45min.
Timer button
Power button
Living room
45 min