Werbung
Person- related safety:
Warning!
The lever must be kept hold during the entire work process to
Transport of the press
Danger of crushing:
Warning!
Installation of Press
Warning!
Only trained and skilled staff is allowed to work on the machine!
Before mounting/commissioning and the use of this product this
manual must be read carefully.
Pay attention that no parts of the body enter the tool area during
operation!
The tool area is the main hazardous area of the press.
avoid injuries caused by a possible strike back of the lever
If it's necessary to remount parts from the press, make sure that the
integrated spring is unloaded.
Lift the 8/16 HKPV/HMS/HMC und 50 HKP presses only by using the
eye bolt! Regarding transport media, mind weight of press
Lift the type 2.5, 5, 8/12 HKPV/HMS/HMC presses only by handle
the press stand, never carry the presses by the handle or the guide
unit
Unpack and degrease the press.
Use eye bolt for transport
Regarding transport media, mind weight
of press
When lifting the press balance out the
incline to the front by holding on press
table.
A solid work bench or the additionally
available understructure suited for
installation
Before commissioning you must fix the
press using the four bores on the press
stand
Mounting Bores
Werbung
