Memory
en
BMemory
T he memory function allows you to save the setting for
M e m o r y
a dish and call it up at any time.
The memory function is useful if you prepare one dish
particularly frequently.
Saving memory settings
Example: 360 W, 25 minutes
Touch the l field.
1.
The indicator lamp above the field will light up.
Touch the microwave power setting you require.
2.
The indicator lamp above the field will light up and
1:00 min will appear in the display.
Set the cooking time on the settings area.
3.
Touch the l field to confirm.
4.
The clock will reappear. The setting has been saved.
Notes
You cannot save several microwave power settings
■
one after the other.
You cannot save automatic programmes.
■
You can save the memory settings and start the
■
appliance immediately. Do not touch l to finish;
touch the < field instead.
To create a new memory setting: Touch the l field.
■
The old settings will appear. Save the new
programme as described in steps 1 to 4.
Starting the memory
It is very easy to start the saved programme. Place your
meal in the appliance. Close the appliance door.
Touch the l field.
1.
The saved settings will be displayed.
Touch the < field.
2.
The cooking time will count down in the display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch a/s. The clock will reappear.
Pausing
Touch the a/s field once or open the appliance door.
Operation will be paused. The indicator lamp above the
a/s field will light up. After closing the door, touch the
< field again.
28
Cancelling operation
Touch the a/s field twice or open the door and touch
the a/s field once.
PProgrammes
Y ou can prepare food really easily using the various
P r o g r a m m e s
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Note: You can choose from 7 programmes.
Setting a programme
Once you have selected a programme, configure the
settings as follows:
Touch the % field repeatedly until the required
1.
programme number appears.
The indicator lamp above the field will light up.
Touch the x field.
2.
The indicator lamp above the field will light up and a
default value for the weight will appear in the display.
Use the settings area to specify the weight of the
3.
dish.
Touch the < field.
4.
You will see the cooking time for the programme
counting down.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch a/s. The clock will reappear.
Making amendments
Touch the a/s field twice and reconfigure the settings.