Microwave Power Settings; Setting The Microwave - Blaupunkt 5P49K1250 Gebrauchsanleitung

You can also use serving dishes. This saves you having
to transfer food from one dish to another. You should
only use cookware with decorative gold or silver trim if
the manufacturer guarantees that they are suitable for
use in microwaves.
Unsuitable cookware
Metal cookware is unsuitable. Metal does not allow
microwaves to pass through. Food in covered metal
containers will remain cold.
Caution!
Creation of sparks: Metal – e.g. a spoon in a glass –
must be kept at least 2 cm from the cooking
compartment walls and the inside of the door. Sparks
can irreparably damage the glass on the inside of the
door.
Cookware test
Never switch on the microwave unless there is food
inside. The short cookware test is the only exception to
this rule.
Perform the following test if you are unsure whether
your cookware is suitable for use in the microwave.
Heat the empty cookware at maximum power for ½
1.
to 1 minute.
Check the temperature of the cookware during this
2.
time.
The cookware should remain cold or warm to the touch.
The cookware is unsuitable if it becomes hot or sparks
are generated.
In this case, stop the test.
:
Warning – Risk of burns!
The accessible parts become very hot when in
operation. Never touch hot parts. Keep children at a
safe distance.

Microwave power settings

Use the touch fields to set the microwave power setting
you require.
90 W For defrosting delicate foods
180 W For defrosting and continued cooking
360 W For cooking meat and for heating delicate foods
600 W For heating and cooking food
800 W For heating liquids
Note: The 800 W microwave power setting can be set
for 30 minutes, 600 W for 1 hour and the other power
settings for 1 hour and 39 minutes.

Setting the microwave

Example: Microwave power setting 600 watts, 10
minutes
Touch the microwave power setting you require.
1.
The indicator lamp above the microwave power
setting will light up.
Set the required cooking time on the settings area.
2.
Touch the < field.
3.
The cooking time will count down in the display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch a/s. The clock will reappear.
Changing the cooking time
This can be done at any time. Change the cooking time
using the control panel.
Pausing
Touch the a/s field once or open the appliance door.
Operation will be paused. The indicator lamp above the
a/s field will light up. After closing the door, touch the
< field again.
Cancelling operation
Touch the a/s field twice or open the door and touch
the a/s field once.
Note: You can also adjust the cooking time first and
then the microwave power setting.
Microwave
en
27