Montáž látkového zastínění a ocelového lana
a)
b)
c)
d)
Hang the wire rope in the turnbuckle hook, connect it with 2
wire rope clamps and hang this in the ring eye.
Zavěste lanko do napínacího háčku, spojte 2 sponkami a zavěste ho
do kruhového očka.
Spread out the fabric and thread the wire rope through the
eyelets on one side alternately at the top and bottom. Start
with the 2nd eyelet first. Hang the 1st eyelet with the turn-
buckle on the ring eye.
Roztáhněte látku a provlékněte ocelové lanko přes očka na
jedné straně střídavě nahoře a dole.
Začněte prvním očkem. Zavěste první očko s napínákem na
kruhové očko.
Tighten the wire rope in the lower eyelet and fasten it with 2
wire rope clamps on each side.
Utáhněte ocelové lanko ve spodním kruhovém očku a utáhněte jej
pomocí 2 ocelových sponek.
Finally, tension the wire rope using the turnbuckle hooks.
Nakonec napněte lano pomocí háků napínáku.
Please repeat the above steps for the other side.
Opakujte výše uvedené kroky pro druhou stranu.
2x
8x
2x
-