Assembly Of The Hose Reel; Assembly Of The Irrigation Bar For Grass - Stocker 303 Benutzerhandbuch

6
Assemble the hose-reel (85) onto the support (79) by fastening it with the pivots, washers and
cotter pins as shown in the picture. (82+81+80).
6

Assembly of the irrigation bar for grass

94
Art. 303 / Art. 304
Wheelbarrow battery pump 80 L and 100 L

Assembly of the hose reel

Art. 303 / Art. 304
Wheelbarrow battery pump 80 L and 100 L
Assembly of the irrigation bar for grass
With bolts (117) and nuts (115), fasten the two metal supports (116) onto the corres-
ponding plates on the back of the pump, using the hole in the corner. In order to adjust
the inclination, fasten the metal supports trough one of the three holes available,
using the quick-release bolt (118) and the clip (119).
With bolts (36) and nuts (115), fasten the two lateral supports (114) onto the main one
(116). In order to assemble the bar with the closed setup (4 nozzles), use the most
internal holes, to assemble the bar with the open setup (6 nozzles), use the most
external holes.
Fasten the plastic hooks (110) with the spacer (111), bolts (112), and nuts (60).
For further information about the product, please contact info@stockergarden.com.
Sign up to our newsletter and keep up to date with our latest news info@stockergarden.com
6
Connect the tube, located on the
back of the pump, to the T joint (107)
passing through the centrale hole.
95