Assembly; Wheel Assembly; Assembly Of The Handles; Assembly Of The Hose Reel Support - Stocker 303 Benutzerhandbuch

6
Please note: The numbers in brackets refer to the components indicated on the sheet attached
to the user manual, which shows all the product's components
6
Insert the axis (33) into the dedicated holes in the cart, apply the washer (31) and subsequently
the wheels (32) on both sides. When assembling the wheels, make sure that the inflation valve is
not directed towards the pump, but towards the outside.
Lock each wheel with the nut-blocking ring (30), followed by the nut (29) and the blind nut (99).
Sequence of assembly
92
Art. 303 / Art. 304
Wheelbarrow battery pump 80 L and 100 L

Assembly

Wheel assembly

Art. 303 / Art. 304
Wheelbarrow battery pump 80 L and 100 L

Assembly of the handles

Place the handles (42) onto the dedicated pilot hole on the chassis and fasten it with 2 long bolts
(21) and a self-locking nut (38).

Assembly of the hose reel support

Fasten the support bar (79) with two bolts and nuts for each side, using the nut-blocking ring
(30), as shown in the picture.
For further information about the product, please contact info@stockergarden.com.
Sign up to our newsletter and keep up to date with our latest news info@stockergarden.com
6
6
93