Kenwood Smoothie JUNIOR SB100-Serie Anleitung Und Rezeptvorschläge Seite 6

Downloaded from www.Manualslib.com
2 Screw the goblet onto the blade
unit.
3 Screw the tap assembly onto the
goblet, then place on the power unit.
Check that the dispensing tap lever
●
is in the off position .
4 Place the liquid ingredients into the
goblet.
This includes fruit (not frozen), fresh
●
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked LIQUIDS.
5 Add ice or frozen ingredients to the
goblet.
This includes frozen fruit, frozen
●
yoghurt, ice cream or ice. These can
be added up to the level marked
FROZEN INGREDIENTS.
6 Push the lid onto the goblet.
7 Either push the cap into the lid, or
place the stirrer in the hole.
The stirrer can be used when
●
blending thick mixtures or when
large quantities of frozen items are
used.
8 Switch on by pressing the on/off
button. Allow the ingredients to
blend until smooth.
Use the stirrer by moving it in an anti
●
clockwise direction.
9 Switch off by pressing the on/off
button.
10 Place a glass under the tap, press
the on/off button and press down
on the dispensing tap lever.
Thinner drinks may dispense without
●
having to switch on the power unit.
Use the stirrer to assist when
●
dispensing thick smoothie drinks.
To help dispense the last amount of
●
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
11 When the glass is full, switch off and
release the lever.
hints
To make a thinner smoothie drink
●
add more liquid.
manuals search engine
To make a thicker smoothie drink
●
add more frozen ingredients but do
not exceed the frozen limit marked
on the goblet.
Before fitting the lid, push the solid
●
ingredients into the liquid using the
stirrer.
Use the pulse button to operate the
●
power unit in a start stop action to
control the texture of your drink.
After blending, some drinks may not
●
be completely smooth due to seeds
or the fibrous nature of ingredients.
Some drinks may separate on
●
standing, therefore it's best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
Never blend dry ingredients (eg
●
spices, nuts) or run the Smoothie
Blender empty - it's intended for
blending smoothie drinks only.
Don't use the blender as a storage
●
container. Keep it empty before and
after use.
Some liquids increase in volume and
●
froth during blending eg milk, so do
not overfill and ensure the lid is
correctly fitted.
To ensure long life of your Smoothie
●
Blender, never run it continuously for
longer than 60 seconds.
Never blend food that has formed a
●
solid mass during freezing, break it
up before adding to the goblet.
cleaning
Always switch off, unplug and
●
dismantle before cleaning.
Never let the power unit, cord or
●
plug get wet.
Empty the goblet before unscrewing
●
it from the blade unit.
Always wash immediately after use.
●
Don't let food dry onto the goblet
assembly as this will make cleaning
difficult.
Don't wash any part in the
●
dishwasher.
3