Status Indicators - Axis P5512-E Installationsanleitung

Page 16
Set the IP address with ARP/Ping
1. Acquire an IP address on the same network segment your computer is connected to.
2. Locate the serial number (S/N) on the product label on the camera.
3. Open a command prompt on your computer and enter the following commands:
Windows syntax:
arp -s <IP Address> <Serial Number>
ping -l 408 -t <IP Address>
UNIX/Linux/Mac syntax:
arp -s <IP Address> <Serial Number> temp
ping -s 408 <IP Address>
4. Check that the network cable is connected to the camera and then start/restart the camera, by
disconnecting and reconnecting power.
5. Close the command prompt when you see 'Reply from 192.168.0.125: ...' or similar.
6. In your browser, type in http://<IP address> in the Location/Address field and press Enter on
your keyboard.
Notes:
• To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.
• To use the ARP command in Windows Vista, right-click the command prompt icon and select Run as
administrator.
• To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.

Status indicators

Unit
AXIS P5512-E
Note:
For more information on the AXIS P5512-E status indicators, please see the User's Manual available from the
AXIS Network Video Product CD supplied with this product or from the website at www.axis.com
Downloaded from www.Manualslib.com
Color
Unlit
Amber
Amber and red
Red
Green
manuals search engine
AXIS P5512-E Installation Guide
Windows example:
arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125
UNIX/Linux/Mac example:
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
Indication
Steady connection/normal operation
Steady during system initiating and reset to factory default.
Flashes during firmware upgrade.
No network connection
Firmware upgrade failure
Steady for 10 sec. after successful restart