Special Informations - clearaudio electronic Bluemotion mit Satisfy Bedienungsanleitung

4. Special information
To achieve the full clearaudio warranty, it is nessecary that you fill out and send the
corresponding part of the warranty registration card back to clearaudio, within two weeks
after purchase. Only if the product is returned in it´s original packing clearaudio can
provide the warranty.
Transportation advice: If any transportation of the
nessecary, please always remove the turntable platter. Otherwise serious damage can occure
!
The bearing hole needs to be covered as well, to avoid any dust coming into the bearing.
Always take of the pulley of the motor unit as well, to prevent the motor shaft from any
damages.
If the
mains supply.
Every two years you can lubricate (only if you will recongnize speed variations) the bearing
of the turntable platter with the delivered oil. In this case it is enough to put 4 or 5 drops of
the oil into bearing.
Please take special caution to any damages of the power cord. Any damages should only be
repaired only by authorized personal. A damaged power cord must be exchanged
immediately!
Caution !
clean the
surface!!!
5. Service
In case of any nessecary service for all clearaudio products should be done by authorized
personal only.
In case of any repair, the clearaudio
authorized dealer or directly to the clearaudio factory.
Seite 23
Downloaded from www.Manualslib.com
Bluemotion
-turntable is a longer time not in use, please disconnect the motor from the
Please use only non alcoholic fluids and only fluids specially used for acrylic, to
Bluemotion
-turntable. Otherwise could occure damage to the material or the
manuals search engine
Bluemotion mit Satisfy
Bluemotion
Bluemotion
-turntable needs to be send to your nearest
Clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Phone: +49-(0)1805/059595
www.clearaudio.de
info@clearaudio.de
Bedienungsanleitung
-turntable should be
 clearaudio electronic GmbH 2006