Audio-Anschlüsse - Behringer XENYX 1002B Bedienungsanleitung

5
XENYX 1002B Bedienungsanleitung
2. Audio-Anschlüsse
Balanced use with XLR connectors
1 2
3
input
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
1 2
3
output
For unbalanced use, pin 1 and pin 3
have to be bridged
Abb. 2.1: XLR, symmetrisch
Balanced ¼" TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Abb. 2.2: 6,3 mm-Klinkenstecker, symmetrisch
Unbalanced ¼" TS connector
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
tip
(signal)
Abb. 2.3: 6,3 mm-Klinkenstecker, unsymmetrisch
tip
sleeve
shield
Abb. 2.4: Cinch
Balanced ¼" TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Abb. 2.5: Insertkabel
tip
sleeve