Technische Daten - Behringer XENYX 1002B Bedienungsanleitung

10
XENYX 1002B Bedienungsanleitung

6. Technische Daten

Mono Inputs
Microphone inputs (XENYX Mic preamp)
Type
Mic E.I.N.1 (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Frequency response (-1 dB)
Frequency response (-3 dB)
Gain range
Max. input level
Impedance
Signal-to-noise ratio
Distortion (THD + N)
Line Input
Type
Impedance
Gain range
Max. input level
Frequency Response (Mic In → Main Out)
<10 Hz - 90 kHz (-1 dB)
<10 Hz - 160 kHz (-3 dB)
Stereo Inputs
Type
Impedance
Gain range
Max. input level
XLR connector, electronically balanced,
discrete input circuit
-134 dB 135.7 dB A-weighted
-131 dB 133.3 dB A-weighted
-129 dB 130.5 dB A-weighted
<10 Hz - 160 kHz (-1 dB)
<10 Hz - 200 kHz (-3 dB)
+14 dB to +60 dB
+12 dBu @ +10 dB GAIN
2.6 k Ohms balanced
120 dB A-weighted
(0 dBu In @ +22 dB GAIN)
0.005% / 0.004% A-weighted
1/4" TRS jack, electronically balanced
20 k Ohms balanced,
10 k Ohms unbalanced
-10 dB to +40 dB
+22 dBu @ 0 dB GAIN
+0 dB / -1 dB
+0 dB / -3 dB
2 x 1/4" TRS jack, balanced
20 k Ohms balanced,
10 k Ohms unbalanced
-20 dB to +20 dB
+22 dBu @ 0 dB GAIN
CD/Tape In
Type
Impedance
Max. input level
Equalizer
LOW
MID
HIGH
Channel Inserts
Type
Max. input level
MON/FX Send
Type
Impedance
Max. output level
Main Outputs
Type
Impedance
Max. output level
Phones Output
Type
Max. output level
CD/Tape Out
Type
Impedance
Max. output level
RCA connector
10 k Ohms
+22 dBu
50 Hz / ±15 dB
700 Hz / ±15 dB
10 kHz / ±15 dB
1/4" TRS jack, unbalanced
+22 dBu
1/4" mono jack, unbalanced
120 Ohms
+22 dBu
1/4" TRS jack, electronically balanced
240 Ohms balanced,
120 Ohms unbalanced
+28 dBu
1/4" TRS jack, unbalanced
+19 dBu / 150 Ohms (+25 dBm)
RCA connector
1 k Ohms
+22 dBu