Troubleshooting; Technical Data - AEG DVB-S 4540 Bedienungsanleitung, Garantie

AEG_BDA_DVB_S4540_GB_k.qxd:CL_BDA_DVB_T776_GB_ka.qxd

Troubleshooting

Symptom
The view in the display
does not light up.
No sound and no picture,
control lamp on the
receiver is on.
No sound or picture.
The TV set does
not show a picture.
Poor picture,
locking error
The remote control
does not function.
If a malfunction still cannot be rectified, please
contact your specialist dealer or the manufacturer.

Technical data

Receiver
Dimensions (W x D x H)
Weight (without packaging) 0.63 kg
Operating temperature
Storage temperature
System
Corresponds to DVB standard
Tuner input
Jack
Frequency range
Level range
Demodulation
Teletext
Corresponds to DVB
standard
Possible cause and remedy
The power cable is not connected.
Connect the power cable to the mains socket.
The mains switch is not switched on.
Switch the mains switch on.
The receiver is in standby mode.
Press the "Power" key. The receiver switches on and the
channel is shown on the TV screen.
The receiver is in VCR mode.
Press the DTV/VCR button.
No signal or a weak signal only.
Check the cable connection to the receiver and from the receiver to the
connected devices.
Align the antenna.
The system is not connected correctly.
Check the SCART or HF cable's connection.
The TV set is not in AV mode.
Switch the TV set to the relevant AV input.
The antenna is not aligned correctly.
Align the antenna.
The batteries are spent.
Replace the batteries with new ones.
The remote control is not being pointed properly.
Point the remote control at the front of the receiver and make sure that nothing
is positioned between the remote control and the receiver.
MPEG audio (MPEG 1 layer 1 and 2)
Typ
220 x 173 x 43 mm
Bit rate
0 ºC to +40 ºC
Remote control
–40 ºC to +65 ºC
Range
Mains adapter
Current consumption
Mains voltage
F socket (75 Ω)
950 ~ 2150 MHz
Connections
-85 ~ 25 dBm
Digital audio output
QPSK
Tuner input
Tuner loop-out
SCART
STB (normal TV) / VBI
USB
02.09.2009 16:05 Uhr
Mono, stereo
32 / 44,1 / 48 kHz
Up to 5 m
Max. 10 W
100 – 240 V AC
50–60 Hz
1 x RCA cinch coaxial
F socket
F socket
RGB, CVBS, Audio
2.0
Seite 49
49