Changing System Settings - AEG DVB-S 4540 Bedienungsanleitung, Garantie

AEG_BDA_DVB_S4540_GB_k.qxd:CL_BDA_DVB_T776_GB_ka.qxd

Changing system settings

Select the "SETUP/Installation/General Setting"
menu.
Setting
OSD Language
Audio Language
Subtitle Language
Auto time zone
Time Zone
Carry out the desired settings.
Setting
TV Format
TV Mode
OSD Transparenz
Banner Display Time 1s-Always
Video Output
Carry out the desired settings.
40
Options Explanation
You can select the required language for the screen menu.
Here you can set the preferred audio language.
Here you can select the preferred subtitle language.
On/off Here you can set whether the time zone should be set automatically.
Here you can set the corresponding time zone.
(Only possible if the option "Auto time zone" is set to "Off".)
Options Explanation
4:3 LB/4:3 PS/ Select between 4:3 format or 16:9 format (wide screen) according to your
16:9 PB/16:9 AUTO screen.
4:3 LB: transmissions in wide screen format are fully displayed. You will see
black margins on the top and the bottom of the screen.
4:3 PS: Transmissions in wide screen format are altered in such a way
that the most important part of the picture is always in the centre of a
4:3 picture.
16:9 PB: Select the 16:9 format with a wide screen TV.
16:9 AUTO: Select the 16:9 format for a television with a wide screen is so
that the picture is completely filled.
PAL/NTSC/AUTO If you are not sure which TV standard is suitable, select "Auto".
1-8 Select the transparency of the OSD menu.
Select the time after which the OSD is to fade out.
CVBS/RGB Select the suitable video signal.
02.09.2009
You can carry out the following settings in the
submenus:
Select the "SETUP/TV-SETUP" menu.
You can carry out the following settings in the
submenus:
16:05 Uhr Seite 40