AEG LB Z-500 Bedienungsanleitung, Garantie Seite 27

AEG_Z500_Bed_Anl.qxd
Connection
Connect the loudspeakers to your amplifier according to the following connection instruc-
tions:
Right-hand
loudspeaker
Connect the red loudspeaker wires to the red connections and the black wires to the black
connections.
Please note:
• Do not expose the loudspeakers to extreme heat, cold or moisture.
• Switch your amplifier off before you connect the loudspeakers or make any changes to
the connection.
• Please ensure that the wires of the loudspeaker connections do not touch one another
as there is a danger of a short circuit.
• Do not operate your amplifier at maximum volume. This may result in damage.
• Turn down the volume before you switch on the amplifier or after you have changed the
sound source.
• Never connect the loudspeakers to the mains power supply!
• Do not touch the loudspeaker membranes with your hands or with other objects as this
will damage them.
01.06.2005 10:39 Uhr
Stereo
amplifier
Output
Seite 27
GB
Left-hand
loudspeaker
27