Kit Contents - HH Electronics Tessen TNA-2051 Benutzerhandbuch

LINE ARRAY
TNA-BRK1 - FLYING BRACKET
The TNA-BRK1 flying bracket for use with the TNA-1200S and TNA-2051. With its
solid steel construction, the TNA-BRK1 securely supports up to two TNA-1200S
and eight TNA-2051 enclosures simultaneously.
FLYING BRACKET TO TNA-1200S
TNA-BRK1
The is attached to the TNA-1200S using two Side Brackets and one Rear Bracket.
Spring washers must be used with each screw!
Be extremely careful to not cross thread the side screws when filling the brackets!
FLYING BRACKET TO TNA-2051
A TNA-2051 requires the use of Side Brackets only.
As with the TNA-1200S, spring washers
must be used with all screws!
© 2020 HH Electronics Ltd
SPRING WASHER
REAR BRACKET
SPRING WASHER
LOCKNUT
SPRING WASHER
SPRING WASHER
Designed and Engineered in the UK by HH Electronics LTD.
ARRAY

KIT CONTENTS

1 x Lift Bracket assembly
3 x D-shackle
2 x Side plate
1 x Rear plate
7 x M8x25mm connector bolt
7 x Spring washers
6 x M8 lock nuts
LOCKNUT
SPRING WASHER
SIDE BRACKET
LOCKNUT
SPRING WASHER
SIDE BRACKET
4