Parts Diagram - COMO AUDIO Turntable Analog Benutzerhandbuch

Please keep the original packaging in order to safely ship or otherwise transport your
EN
Turntable in the future, especially if service is ever required. The warranty does not include
damaged caused by shipping.
IN THE BOX:
➢ TURNTABLE / PLATTER / SLIP MAT / DUST COVER
➢ ALLEN WRENCH 2.0 mm (FITS COUNTERWEIGHT AND CARTRIDGE)
➢ TWO-POINT CARTRIDGE ALIGNMENT (IF REPLACING CARTRIDGE)
➢ 15V/0.8A UNIVERSAL POWER SUPPLY
➢ RCA TO RCA AUDIO CABLE 4'/1.2M
➢ INSTRUCTION & SET UP GUIDE
➢ 45 RPM "SINGLE" ADAPTER
➢ RCA TO 3.5 mm CABLE ADAPTER (FOR USE WITH COMO AUDIO AUX INPUT)
➢ DRIVE BELT

PARTS DIAGRAM:

1 Motor
2 Drive pulley
3 Drive belt
4 Sub-platter Tonearm
5 Platter and slip mat
6 Counterweight
7 Tonearm lift lever
8 Tonearm rest and transport lock
9 Tonearm
10 Dust Cover
11 Dust Cover Hinges
12 Hinge fasteners
13 Analog output and Ground screw
2