WMF 3 Gebrauchsanweisung Seite 14

14
Downloaded from www.Manualslib.com manuals search engine
use and can only be removed by turning the drive unit anti-
clockwise. The blender / chopper bowl can now be removed.
The blender, chopper bowl blades and measuring cup can
be cleaned in a dishwasher. The chopper bowl lid cannot be
cleaned in a dishwasher, but should be cleaned with a damp
cloth. Never immerse the appliance, mains cable or mains plug
in water or other liquids. Never pour water or other liquids over
the appliance or place the appliance on wet or damp surfaces.
Wipe the appliance and mains cable with a damp (but not too
wet) cloth. Dry the appliance and the mixing gadgets carefully.
Leave the components to air dry for a few minutes if required.
Do not use any abrasive cleaning agents.
For UK use only
• This product is supplied with a 13 A plug conforming to BS
1363 fitted to the mains lead. If the plug is unsuitable for
your socket outlets or needs to be replaced, please note the
following. If the plug is a non-rewireable one, cut it from
the mains lead and immediately dispose of it. Never insert it
into a socket outlet as there is a very great risk of an electric
shock.
• The replacement of the plug at the mains lead has to be done
according to the following instructions:
Important: The wires in this mains lead are coloured in accor-
dance with the following code:
blue Neutral
brown Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
• the wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black,
• the wire which is coloured brown must be connected
to the terminal which is marked with the letter L or
coloured red.
• Do not connect any wire to the terminal which is
marked with the letter E or by the earth symbol,
or coloured green or green and yellow.
• If a 13 A (BS 1363) plug is used it must be fitted with a
3 A fuse conforming to BS 1362 and be ASTA approved.
If any other type of plug is used, the appliance must be
protected by a 5 A fuse either in the plug or adapter or
at the distribution board. If in doubt - consult a qualified
electrician.
• Never use the plug without closing the fuse cover.