Safety Instructions - WMF 3 Gebrauchsanweisung

Downloaded from www.Manualslib.com
Technical data
Rated voltage:
Power consumption: 400 W
Protection class:
Short time operation: 1 minute (for blender attachment) /
15 seconds (for chopper attachment)

Safety instructions

• Remove packaging material before the first use, including
the plastic cover and the blade protector cover.
• Connect the appliance to an alternating current only,
with voltage in accordance with that shown on the
appliance's type label. The wire and plug must be dry.
• Never disconnect the mains plug from the socket by
the cord or with wet hands.
• The appliance and the connection cable should be
protected from the effects of heat.
• Only switch the blender on once it has been placed in the
food to be blended. Only remove from the food once the
appliance has come to a stop.
• Handle the appliance with care. Wait for the appliance to
come to a stop before changing the attachments. The blender
has a sharp blade.
• If the appliance becomes blocked during use, switch it off
immediately and remove the offending object, for example
a piece of fruit or vegetable which has become stuck.
• Allow boiling liquids to cool down before blending. Caution!
There is a scald hazard when working with hot liquids.
• The connection cable should not be pulled over sharp edges,
wedged or allowed to dangle, and should be protected from
heat and oil.
• The Stick Blender should not be placed on hot surfaces
such as hobs or similar, and should be kept away from
naked flames.
• The Stick Blender is designed for short-time operation. Pause
after 1 minute's use to allow the appliance to cool down.
• Do not touch the blade while the Stick Blender
is plugged in.
• Keep hairs, fingers, clothing, and any accessories or
utensils away from the blade.
• Do not use the Stick Blender for ice crushing, and do not
chop hard foods such as spices, coffee beans to avoid any
damages.
manuals search engine
220 - 240 V 50/60 Hz
II
11