Control Panel; Power Led; Error Led; Supplying Power - Epson TM-P60 Bedienungsanleitung

Control Panel (LEDs and Switches)
See illustration

POWER LED

On
Off
Flashing
Printer
Condition
Power On
Power Off,
battery
installed, and
AC adapter
connected
Printer
Condition
Power On and
battery
installed
Power Off and
battery
installed
Buttons
POWER
Press the button to turn the power on or off. To turn off the power, you need to
hold the button for more than 2 seconds.
FEED
Press the button to feed paper.

Supplying Power

You can supply power through the battery pack packaged with the printer or the
AC adapter PS-10 (Model: DA-42Y12). See illustration
Be sure to use the battery LIP-2500 that came with the printer. Using a battery
other than the one specified may cause fire, explosion, leakage, overheating
or other damage.
There is risk of explosion if the battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
Downloaded from www.Manualslib.com
B
.
Meaning
Power is on.
Power is off.
The printer is in power-off operation or is in an area where wireless communication is
not possible.
ERROR Meaning
LED
On Printer is offline (paper out, power-on initialization, roll paper cover open,
power-off operation, or when the battery is used to supply the power,
the remaining battery charge is not enough for printer operation).
Off Printer is online.
Flashing The temperature of the printer is too high. The printer resumes printing
automatically when the temperature returns to normal.
On Indicates that an abnormality occurred during battery charging. The
battery must be replaced with a new one.
Off Battery is being charged. (BATT. [battery] LED is on.)
BATT. Meaning
LED
On Remaining battery charge is not enough. It must be fully charged.
Off Remaining battery charge is adequate.
Flashing Remaining battery charge is below half.
On The battery is being charged.
Off The battery is fully charged.
WARNING:
CAUTION:
manuals search engine
C
.
TM-P60 User's Manual (Bluetooth) 7
English