Alignment And Adjustment - Toshiba V-752EW Serviceanleitung

5. Alignment and Adjustment

5-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) Remote control used for same chassis as a accessory is available for all adjustments.
5) How to adjustment.
- Press the "SW713" button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.
5-1-1 Location of adjustment button of remote control
Toshiba
Downloaded from www.Manualslib.com
X-Point (Tracking Center)
Adjustment
NVRAM Option Setting
Head Switching Adjustment
manuals search engine
ON/
STANDBY
DISPLAY EJECT
1 2 3
CH
4 5 6
8 9
7
TRK
I.SELECT COUNT.RST
0
INDEX COUNT/TR CLR/RST
F.ADV
REC TIMER
MENU
PLAY
REW FF
CURSOR
SLOW PAUSE / S T I L L
STOP
OK
SP/LP PROG. AUDIO TV/VIDEO
A.DUB SAT.MONI. SAT.CONT. PICTURE
VT-752EW
Fig. 5-1
5-1