Toshiba V-752EW Serviceanleitung Seite 38

Disassembly and Reassembly
1-2-9 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass'y Removal
1) Remove the Belt Pulley. (Refer to Fig. 4-35)
2) Remove the Gear Loading Drive Πafter releasing
Hook [A] in the direction arrow as shown in detail
drawing.
3) Remove the Slider Cam ´.
4) Remove the Lever Load ˇ, Link Load ˆ & Lever
Load ¨, Link Load Ø.
´ SLIDE CAM
Fig. 4-18 Gear Loading Drive, Slider Cam,
4-10
Downloaded from www.Manualslib.com
ΠGEAR LOADING DRIVE
HOOK(A)
¨ LEVER LOAD T
Ø LINK LOAD T
ˇ LEVER LOAD S
ˆ LINK LOAD S
Lever T, S Load Ass'y Removal
manuals search engine
1-2-10 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass'y Assembly
1) When reinstalling, be sure to align dot of Lever
Load T Ass'y Œ with dot of Lever Load S Ass'y ´
as shown in drawing, (Refer to Timing Point 1).
2) Insert the Pin A,B,C,D into the Slider Cam ˇ hole,
3) Be sure to align dot of Lever Load T Πand dot of
Gear Loading Drive ¨, (Refer to Timing Point 2).
4) Aline dot of Gear Loading drive ¨ with mark of
Slider Cam ˇ as shown in drawing(Refer to
Timing Point 3).
TIMING POINT 1
ΠLEVER LOAD T
LEVER LOAD T
TIMING POINT 2
TIMING POINT 3
PIN A
PIN C
ˇ SLIDER CAM
Fig. 4-19 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass'y Assembly
´ LEVER LOAD S
LEVER LOAD S
PIN D
PIN B
Toshiba