Printer.test; Maintenance - Mettler Toledo P25 Bedienungsanleitung

Applications (P28 only):
Press briefly
Statistics Application
➞ Start "Statistics applica-
Esc
M+
➞ Add a new sample and
Esc
M+
➞ If needed print subtotal
F
Menu
➞ Print and end "Statistics
Esc
M+
Important notes:
Sample weight must be in the range of 70% - 130% of the current average value.
1)
Minimum dynamic weight changed must be 100 d.
1)
, Unit change during the application is not permitted.
1) 2)
, Maximal 999 sample.
1) 2)
Minimum weights + 1d.
2)
5 Printer Test
The Printer is equipped with a self-test that automatically prints out the character set of the printer.
(standard IBM/DOS).
Starting the test
Terminating the test
6

Maintenance

Under normal conditions the Printer requires practically no maintenance. The METTLER TOLEDO
service department is available if servicing is required. Please ask your responsible METTLER
TOLEDO dealer for details.
Press and hold down
1)
tion" (LED on).
press «M+».
press the «F» key.
application" (LED off).
➞ Press the key «h» and power on the Printer.
The printer prints out the current settings.
➞ Power off the Printer.
Totaling Application
2)
➞ Start "Totaling applica-
Esc
M+
➞ Add a new sample and
Esc
M+
➞ If needed print subtotal
F
Menu
➞ Print and end "Totaling
Esc
M+
Printer P25, P26, P28
tion" (LED on).
press «M+».
press the «F» key.
application" (LED off).
1