TerraTec SUBSeSSion Handbuch Seite 19

There are two socket sets for the subwoofer, Sub1 and Sub2.
It doesn't matter which one you use, as the signal is the same from both. However, if you want
to connect another subwoofer it must be TerraTec-approved. Make sure you connect + on the
back of the amplifier to + on the back of the subwoofer, and - on the back of the amplifier to -
on the back of the subwoofer.


‘
Connect the left and right phono connectors of your line level device (for example, your Mini-
Disc, personal CD, keyboard, CD player or PC sound card) to the left and right line in sockets 
on the back of the amplifier, using the cable supplied. Make sure the amplifier is switched off
at the power switch , and that the volume Œ is turned down. Connect the power lead to the
power socket ‘ on the back of the amplifier.
SpeakerMaster SubSession 19
Downloaded from www.Manualslib.com manuals search engine