Use; Key Function - AEG DD9996-B Gebrauchsanleitung

EN

USE

� �
Key Function
A
Upper panel closed: when pressed for about two sec-ond
it opens the upper panel. It switches the motor on at the
latest selected speed.Upper panel open: when shortly
pressed it switches the motor and the lights on/off. It stops
all function and closes the panel
B Decreases the suction speed.
C
Increases the suction speed.
D Functioning only when the upper panel is open. This speed
has been timed at 10 minutes. After that time the system
activates automatically the latest selected speed. The
function is suitable for cooking conditions when vapours
and smells are of the at most emission.
E
Functioning only when the upper panel is open. By press-
ing this key it is possible to set up the motor to a suction
speed at 100 m3/h .
F Functioning only when the motor is on. By pressing this
key it is possible to set the delayed shutdown of the motor
and the lighting to 30 minutes.
G
By pressing this key for about 2 seconds it is possible to
reset the filter saturation alarm.
H By pressing this key the intensity of the lighting sys-tem
can be modified up to five levels.
I
It switches the lights on and off (at maximum speed) inspite
of the panel's position.
L
Upper panel closed: when pressed for about two sec-ond it
opens the upper panel .Upper panel open: when pressed for
about two second it switches off motor and lights resetting
every acti-vated function, and closes the panel.
Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The motor and
lights are switched off, and upper panel can be open or closed.By pressing the D-key for about 5 secon-
ds the keyboard block can be activated or deactivated. This function is confirmed by a Beep and by an
animation on the display.
Downloaded from www.Manualslib.com
� �
�
manuals search engine
� �
Display
Indicates the selected speed.
Number of lit LEDS decreases.
Number of lit LEDS increases.
I flashes and all the LEDS on the display are lit.By press-
ing the key the function is deacti-vated.
24–symbol appears and the LEDS on the display go off
cyclically, one by one. By pressing the key the function
is deacti-vated.
A flashing clock symbol appears. By pressing the key
the function is deacti-vated.
A drop symbol indicates that the metal grease filters
saturation alarm has been activated, and the filters need
to be washed. The alarm is triggered after 100 working
hours. C indicates that the charcoal filter satura-tion alarm
has been activated, and the filter has to be replaced. The
alarm s triggered after 200 working hours.
9
�
�
�