Electrical Connection; Chimney Assembly - AEG DD9996-B Gebrauchsanleitung

8
RECIRCULATION VERSION AIREOUTLET
To install the hood in recycling version, the optional
charcoal filter kit must be purchased.
• Remove the chimney angle bracket.
• Screw the filter cover onto the air outlet, using
four screws 12c (2.9 x 12.5).
• Fix the air outlet grid 8 on the recirculation
air outlet using the 2 screws 12d (2,9 x 9,5)
provided.

ELECTRICAL CONNECTION

• Connect the hood to the mains supply.
• Open the upper panel by pressing the A-key
(See Part "USE" ) for at least 2 seconds.
• Remove the metal filters (See Part "MAINTE-
NANCE") and make sure that the connector
piece of the supply cable is correctly inside the
hood socket.
Upper exhaust Chimney
• Slightly widen the two sides of the upper chim-
ney and hook them behind the brackets 7.2.1,
making sure that they are well seated.
• Secure the sides to the brackets using the 4
screws 12c (2,9 x 9,5) supplied.
Lower exhaust Chimney
• Slightly widen the two sides of the chimney and
hook them between the upper chimney and the
wall, making sure that they are well seated.
• Fix the lower part laterally to the hood body
using the 2 screws 12c (2,9 x 9,5) supplied.
Downloaded from www.Manualslib.com

CHIMNEy ASSEMbLy

manuals search engine
���
�
���
��
�����
���
���
�
���
���
EN