RAPILINE
3 . 0 4 . 0 0
POWER SUPPLY
Power supply and frequency, power consump-
tion and fuses are indicated on the
identification plate.
The electrical connections to the pro-
cessor must be made by a qualified
service person. All wiring must
conform with applicable codes and
The electrical supply line must have
enough capacity to deliver a steady
rated voltage while other equipment in
The processor is supplied as standard for:
208-240 VAC
50/60 Hz
1, 2 or 3 phases + (neutral) + ground
To allow all power supply to be cut off, the
connection is to be made through a main
switch that is easily accessible from the pro-
cessor.
For possible other connections, please contact
your local Agfa-Gevaert Service Department.
Downloaded from
www.Manualslib.com
IMPORTANT
ordinances.
the plant is in operation.
manuals search engine
PRE-INSTALLATION
96.03.13