AGFA Rapiline 51 Serie Benutzerhandbuch Seite 15

ON/OFF
is used for switching the processor from
OFF to STANDBY mode or vice versa.
This key does not remove the power to
the machine. To switch off all power
switch the mains outlet on the wall to
SOUND
Press
"beeper" you hear whenever deactivating
the film sensors.
PAN LIGHT
This function contains two levels of light
intensity. One level is maximum light intensity,
the other level is adjustable from maximum
to minimum, i.e. from maximum to "switched
off."
After having preset the adjustable level, you
can always switch from max. to adjusted
level and vice versa by simply pressing
Adjusting sequence:
Press
Press
P r e s s
18.01.96
Downloaded from www.Manualslib.com
Warning
OFF.
allows you to turn on/off the
or
when reaching required level.
manuals search engine
NOTE
When the processor
disconnected (mains) and switched "ON"
again, the display indication start at max
light intensity. Using the "Panlight" key
the light intensity will be reduced to the
adjusted level.
CONTINOUS DRYER
This function is normally OFF. When
is pressed, the dryer fan will run
continously and the heating elements are
energized. The indicator in the control
panel is lit
A sensor measures the dryer temperature.
Based on this, the temperature is adjusted
according to preset.
If the DEV TEMP function is not correct, this
function cannot be selected
MAN. REPL.
When the icon is pressed 100 cc of re-
plenisher is pumped into the developer
and fixer tanks. If the replenishment
pumps are incorrectly adjusted, call the
Agfa Service Department or an
authorized dealer engineer.
has been
User Manual
Page 11/16/GB