Toro Power Plex 51138 Bedienungsanleitung Seite 3

Introduction
This chain saw is designed for cutting tree branches,
logs, and wooden beams of a diameter no longer than
the cutting length of the guide bar. It is to be used
only by adults. It is designed to use only battery pack
Model 88525 (provided with Model 51138) or Model
88526.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Model 51138T does not include a battery pack or
a charger.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Safety
When using electric power tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock, and personal injury,
including the following:
WARNING
Failure to follow all warnings and instructions
may result in electric shock, fire and/or
serious injury.
Read all safety warnings and all instructions.
Save all warnings and instructions for future
reference.
The term "power tool" in all the warnings refers to
your corded power tool or battery-operated (cordless)
power tool.
1. Work area safety
A. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
B. Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gasses, or dust.
Power tools create sparks, which may ignite
the dust or fumes.
C. Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
2. Personal safety
A. Stay alert, watch what you are doing,
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influence
of drugs, alcohol, or medication. A
moment of inattention while operating power
tools could result in serious personal injury.
B. Use personal protective equipment.
Always wear eye protection. Protective
equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions reduces
personal injuries.
C. Prevent unintentional starting. Ensure
that the switch is in the O
before you connect the tool to a power
source and/or battery pack, pick it up,
or carry it. Carrying power tools with
your finger on the switch or energizing
power tools that have the switch on invites
accidents.
D. Remove any adjusting key or wrench
before turning the power tool on. A
2
position
FF
Contact us at www.Toro.com.
Printed in China
All Rights Reserved