Led Indication - Datalogic Magellan 2300HS Schnellreferenzhandbuch

Green LED Indicator
Table 2. Green LED Indications
LED
INDICATION
a
Scanner Active
(Normal Mode)
Good Read Indi-
a
cation
Program Mode
Indication
Sleep Mode Indi-
cation
Host Disabled
Field Replace-
able Unit (FRU)
Warning (Error
Mode)
FRU Indication
a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be pro-
grammed to display all indications.
4
Downloaded from www.Manualslib.com
The green LED (
Figure 2
DURATION
Scanner (Green) LED on steady and dim
Scanner (Green) LED - bright flash
Scanner (Green) LED - Continuous flash-
ing
Scanner (Green) LED flashes slowly
Scanner (Green) LED 1-second off, 1/10-
second on
Audible low tone 1 second. LED flashes
continuously.
Scanner (Green) LED flashes a coded
sequence in concert with the speaker.
manuals search engine
d) indicates scanner status as shown in the table below.
The scanner is ready for operation. Scanning is immedi-
ately available.
Indicates a bar code has been read and decoded.
Indicates the scanner is in Label Programming Mode.
Cycle power to exit Programming Mode.
The scanner motor and/or laser have automatically
switched off and the unit has entered Sleep Mode due
to extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has been
detected. Call systems support for service.
Occurs ONLY upon Volume/Tone button push following
a FRU warning. Enables service technicians to identify
FRU failures.
Magellan
COMMENT
®
2300HS/2300HS
Ω