HP 3Com IntelliJack NJ2000G Kurzanleitung Seite 2

About This Guide
Overview of the NJ2000G and Its Features
•
NJ2000G Basics
•
Observe All Safety Precautions
•
Check the Shipment
•
Register Your Product
•
Telephone Technical Support and Repair
•
Installation Overview
•
1. Understand the Power Options
•
2. Understand the PoE Capabilities for Port 1 and Port 2
•
3. Plan the Installation
•
4. Attach the Wall-Mount Bracket
•
5. Set Up the Network Cabling
•
6. Connect the NJ2000G to the Network
•
7. Mount the NJ2000G to the Wall
•
8. Connect the Local Power Supply (Optional)
•
9. Connect Devices to the NJ2000G
•
10. Access the NJ2000G Web Interface
•
11. Configure the NJ2000G
•
12. Download and Install the 3Detect Software (Optional)
•
13. Troubleshooting: Check the LEDs
•
Regulatory Statements
•
Overview of the NJ2000G and Its Features
The front of the NJ2000G has four gigabit LAN ports for local switching.
The gigabit LAN uplink port on the rear connects it to the rest of the
network.
The NJ2000G brings gigabit switching capabilities to any single port on an
Ethernet network by allowing connections for up to four networking devices
such as computers, servers, access points, IP cameras, and Voice Over IP (VoIP)
telephones to the network through a single Ethernet connection.
All 5 LAN ports feature 10/100/1000 Mbps with auto-negotiation and auto
MDI-X. The NJ2000G also provides 2 pass-through ports that can be used to
connect 2 additional devices to separate network segments through the same
unit.
2