Siemens EQ.500 classic TP507DX4 Gebrauchsanleitung Seite 74

en Cleaning and servicing
Use and
3.
system" and press
To start the programme, press
4.
a The display will guide you through
the programme.
Place an empty glass under the
5.
outlet system and insert the end of
the suction pipe in the glass.
Press ⁠ .
6.
a The milk system will now clean it-
self automatically.
Empty the glass and clean the suc-
7.
tion pipe.
a The program has ended and the
appliance is ready for operation.
Tip: If you want to clean the milk sys-
tem particularly thoroughly, clean it
regularly by hand.
→ "Cleaning the milk system",
Page 71
Using the descaling programme
Run the descaling programme when
your appliance prompts you. The pro-
cess takes approx. 30 minutes.
Requirement: The brewing unit is
cleaned.
→ "Cleaning brewing unit", Page 72
Press
1.
Use and
2.
ing and care" and press
Use and
3.
scale" and press
To start the programme, press
4.
a The display will guide you through
the programme.
Empty and insert the drip tray.
5.
If there is a water filter, remove it.
6.
Press ⁠ .
7.
Empty the water tank.
8.
Fill a container with 0.5 l lukewarm
9.
water.
Add a Siemens descaling tablet to
10.
the water and stir until the tablet is
fully dissolved.
74
to select "Milk
⁠ .
⁠ .
to select "Clean-
⁠ .
to select "De-
⁠ .
Pour the descaling solution into
11.
the water tank up to the calc mark
and press
⁠ .
Place a container with a capacity
12.
of min. 0.5 l under the outlet sys-
tem.
Place the end of the suction pipe
13.
in the container and press
a The descaling programme will run
for approx. 20 minutes.
Rinse the water tank.
14.
Press
15.
If there is a water filter, insert the
16.
water filter.
→ "Inserting and activating the wa-
ter filter", Page 63
Press
17.
Fill the tank with fresh water up to
18.
the "max" mark.
Press
19.
a The descaling programme takes
approx. 1 minute and rinses the
appliance.
Empty and insert the drip tray.
20.
Thoroughly clean the suction pipe
21.
of the milk system.
a The program has ended and the
appliance is ready for operation.
Using the cleaning programme
Run the cleaning programme when
your appliance prompts you. The pro-
cess takes approx. 9 minutes.
Requirement: The brewing unit is
⁠ .
cleaned.
→ "Cleaning brewing unit", Page 72
Press
1.
Use
2.
ing and care" and press
Use
3.
and press
To start the programme, press
4.
a The display will guide you through
the programme.
Empty and insert the drip tray.
5.
⁠ .
⁠ .
⁠ .
⁠ .
⁠ .
and to select "Clean-
and to select "Clean"
⁠ .
⁠ .
⁠ .
⁠ .