Remote Diagnostics; Software Update; Data Protection; Declaration Of Conformity - Siemens EQ.500 classic TP507DX4 Gebrauchsanleitung

Basic setting

Software update

Remote diagnostics

Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
Software update
You can use this function to update
the software of your appliance, e.g.
for optimisation, troubleshooting or
safety-relevant updating.
The "Home Connect" app informs
you about available software up-
dates.
Running software update
Requirements
¡ The appliance is connected to your
home network and your mobile
device.
¡ The app and the display indicate
that a software update is available.
Start the software update now or
1.
later on.
Wait until the display shows "Soft-
2.
ware update successful".

Data protection

Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
Selection
-
Description
Select available software update and execute.
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby de-
clares that the appliance with Home
Connect functionality meets the es-
sential requirements and other relev-
ant provisions of the Directive
2014/53/EU.
A detailed RED Declaration of Con-
formity can be found online at
www.siemens-home.bsh-group.com
among the additional documents on
the product page for your appliance.
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
Home Connect en
67